System screens, 1 factory ethernet defaults, 2 tcp/ip parameters – ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual
Page 49: 1 ip address assignment, Chapter 5 system screens, 1 factory ethernet defaults 5.2 tcp/ip parameters, Table 6 private ip address ranges

ZyXEL G-560 User’s Guide
Chapter 5 System Screens
49
C
H A P T E R
5
System Screens
This chapter provides information on the System screens.
5.1 Factory Ethernet Defaults
The Ethernet parameters of the G-560 are preset in the factory with the following values:
• IP address of 192.168.1.2
• Subnet mask of 255.255.255.0 (24 bits)
• Encryption: Disable
These parameters should work for the majority of installations.
5.2 TCP/IP Parameters
5.2.1 IP Address Assignment
Every computer on the Internet must have a unique IP address. If your networks are isolated
from the Internet, for instance, only between your two branch offices, you can assign any IP
addresses to the hosts without problems. However, the Internet Assigned Numbers Authority
(IANA) has reserved the following three blocks of IP addresses specifically for private
networks.
Table 6 Private IP Address Ranges
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
You can obtain your IP address from the IANA, from an ISP or have it assigned by a private
network. If you belong to a small organization and your Internet access is through an ISP, the
ISP can provide you with the Internet addresses for your local networks. On the other hand, if
you are part of a much larger organization, you should consult your network administrator for
the appropriate IP addresses.