ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 75)

ZyXEL G-560 User’s Guide
Chapter 6 Wireless Screens 75
The following table describes the labels in this screen.
Table 14 Wireless Security: Disable
LABEL DESCRIPTION
Encryption Method Select Disable to have no wireless LAN security configured.
Apply Click Apply to save your changes back to the G-560.
Reset Click Reset to begin configuring this screen afresh.
6.16.2 WEP
WEP provides a mechanism for encrypting data using encryption keys. Both the AP and the
wireless stations must use the same WEP key to encrypt and decrypt data. Your G-560 allows
you to configure up to four 64-bit, 128-bit or 256-bit WEP keys, but only one key can be used
at any one time.
Figure 42 Wireless Security: WEP
The following table describes the labels in this screen.
Table 15 Wireless Security: WEP
LABEL DESCRIPTION
Encryption Method Select WEP if you want to configure WEP encryption parameters.
Authentication
Type
Select Auto, Open or Shared from the drop-down list box.
WEP Encryption Select 64-bit WEP, 128-bit WEP or 256-bit WEP to enable data encryption.