5 testing the connection to the g-560, Figure 73 java (sun) figure 74 pinging the g-650 – ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual
Page 102

ZyXEL G-560 User’s Guide
102
Chapter 8 Troubleshooting
Figure 73 Java (Sun)
8.5 Testing the Connection to the G-560
1 Click Start, (All) Programs, Accessories and then Command Prompt.
2 In the Command Prompt window, type “ping” followed by a space and the IP address of
the G-560 (192.168.1.2 is the default).
3 Press ENTER. The following screen displays.
Figure 74 Pinging the G-650
C:\>ping 192.168.1.2
Pinging 192.168.1.2 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 time=10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.1.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 10ms, Average = 2m
Your computer can now communicate with the G-560 via the ETHERNET port.