2 starting otist – ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual

Page 83

ZyXEL G-560 User’s Guide

Chapter 6 Wireless Screens

Figure 48 Example Wireless Client OTIST Screen

6.18.2 Starting OTIST

Note: You must click Start in the AP OTIST web configurator screen and in the

wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.

1 In the AP, a web configurator screen pops up showing you the security settings to

transfer. After reviewing the settings, click OK.

Figure 49 Security Key

2 This screen appears while OTIST settings are being transferred. It closes when the

transfer is complete.

Figure 50 OTIST in Progress (AP)

Figure 51 OTIST in Progress (Client)

• In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the

same Setup key). Click OK to go back to the ZyXEL utility main screen.