beautypg.com

Verifying settings, Linux, Figure 88 macintosh os x: network – ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual

Page 114

background image

ZyXEL G-560 User’s Guide

114

Appendix A Setting up Your Computer’s IP Address

Figure 88 Macintosh OS X: Network

4 For statically assigned settings, do the following:

From the Configure box, select Manually.

Type your IP address in the IP Address box.

Type your subnet mask in the Subnet mask box.

Type the IP address of your G-560 in the Router address box.

5 Click Apply Now and close the window.

6 Turn on your G-560 and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.