ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 37)

ZyXEL G-560 User’s Guide
Chapter 3 Introducing the Web Configurator 37
C
H A P T E R
3
Introducing the Web
Configurator
This chapter describes how to configure the G-560 using the Wizard.
3.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy G-560 setup
and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See the Troubleshooting chapter if you want to make sure these functions are allowed in
Internet Explorer or Netscape Navigator.
3.2 Accessing the G-560 Web Configurator
Follow the steps below to access the web configurator, select a language, change your login
password and choose a configuration method from the status screen.
1 Make sure your G-560 hardware is properly connected (refer to the Quick Start Guide).
2 Prepare your computer/computer network to connect to the G-560 (refer to Section 2.2.1
on page 31 for instructions on how to do this).
3 Launch your web browser.
4 Type "192.168.1.2" (default) as the URL. Press Enter.
5 Select your language. Type "1234" (default) as the password and click Login. In some
versions, the default password appears automatically - if this is the case, click Login.