Ip screen, 1 overview, 2 what you can do in the ip screen – ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual
Page 97: 3 what you need to know about ip, Chapter 10 ip screen, Figure 46 ip setup, Ip screen (97)
ZyXEL NWA-1100 User’s Guide
97
C
H A P T E R
10
IP Screen
10.1 Overview
This chapter describes how you can configure the IP address of your ZyXEL Device.
The Internet Protocol (IP) address identifies a device on a network. Every networking device
(including computers, servers, routers, printers, etc.) needs an IP address to communicate
across the network. These networking devices are also known as hosts.
Figure 46 IP Setup
The figure above illustrates one possible setup of your ZyXEL Device. The gateway IP
address is 192.168.1.2 and the IP address of the ZyXEL Device is 192.168.1.2 (default). The
gateway and the device must belong in the same subnet mask to be able to communicate with
each other.
10.2 What You Can Do in the IP Screen
Use the IP screen (see
) to configure the IP address of your ZyXEL
Device.
10.3 What You Need to Know About IP
The Ethernet parameters of the ZyXEL Device are preset in the factory with the following
values:
1 IP address of 192.168.1.2
2 Subnet mask of 255.255.255.0 (24 bits)