ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 80)

Chapter 7 Wireless Security Screen
ZyXEL NWA-1100 User’s Guide
80
Figure 34 Security: 802.1x Only for Access Point
The following table describes the labels in this screen.
7.4.2.2 Wireless Client
Use this screen to use 802.1x-Only security mode for your ZyXEL Device that is in Wireless
Client operating mode. Select 802.1x-Only in the Security Mode field to display the
following screen.
Table 17 Security: 802.1x Only for Access Point
LABEL DESCRIPTION
Security Mode Choose 802.1x Only in this field.
ReAuthentication
Time
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes). Alternatively, enter “0” to turn reauthentication off.
Note: If wireless station authentication is done using a
RADIUS server, the reauthentication timer on the
RADIUS server has priority.
Group-Key
Update
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.