ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 86)

Chapter 7 Wireless Security Screen
ZyXEL NWA-1100 User’s Guide
86
7.4.5.2 Wireless Client
Use this screen to employ WPA2 or WPA2-MIX as the security mode of your ZyXEL Device
that is in Wireless Client operating mode. Select WPA2 or WPA2-MIX in the Security
Mode field to display the following screen.
Figure 40 Security: WPA2 or WPA2-MIX for Wireless Client
The following table describes the labels in this screen.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 22 Security: WPA2 or WPA2-MIX for Access Point
LABEL DESCRIPTIONS
Table 23 Security: WPA2 or WPA2-MIX for Wireless Client
LABEL DESCRIPTION
Security Mode Choose the same security mode used by the AP.
IEEE802.1x
Authentication
EAP Type The options on the left refer to EAP methods. You can choose either TLS, LEAP,
PEAP or TTLS. The default value is PEAP.
The options on the right refer to authentication protocols. You can choose
between MSCHAPv2 and GTC.The default value is MSCHAPv2.
User Information
Username Supply the username of the account created in the RADIUS server.
Password Supply the password of the account created in the RADIUS server.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.