ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 106)

Chapter 11 Remote Management
ZyXEL NWA-1100 User’s Guide
106
Figure 52 Remote Management: WWW
The following table describes the labels in this screen.
11.7 The SNMP Screen
Use this screen to have a manager station administrate your ZyXEL Device over the network.
To change your ZyXEL Device’s SNMP settings, click REMOTE MGMT > SNMP. The
following screen displays.
Table 31 Remote Management: WWW
LABEL DESCRIPTION
WWW
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Secured Client
MAC Address
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the MAC address that you specify
to access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.