ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 68)

Chapter 6 Wireless Settings Screen
ZyXEL NWA-1100 User’s Guide
68
6.4.3 Bridge Mode
Use this screen to have the ZyXEL Device act as a wireless network bridge and establish
wireless links with other APs. You need to know the MAC address of the peer device, which
also must be in bridge mode.
Use this screen to use the ZyXEL Device as a wireless bridge. Select Bridge as the
Operation Mode.
Figure 29 Wireless: Bridge
The following table describes the bridge labels in this screen.
Table 11 Wireless: Bridge
LABEL DESCRIPTIONS
Basic Settings
Operation Mode Select Bridge in this field.