ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 47)

Chapter 4 Tutorial
ZyXEL NWA-1100 User’s Guide
47
2 You should now see a tab that says Site Survey (refer to Figure 18 ). Click on this. A
window should pop up which contains a list of all available wireless devices within your
ZyXEL Device’s range. Copy the SSID of the AP you want your wireless client to
connect to (refer to
Figure 19 ).
3 For this example, you want to connect to the access point, A.The SSID that you should
copy is ZyXEL NWA-1100 A (refer to Figure 15 to check the SSID of Station A).
4 Go back to the screen in Figure 17 . In the SSID field, enter ZyXEL NWA-1100 A (refer
to Figure 18 ).
5 Set the Wireless Mode to the same one set for the access point. Click Apply.
Figure 17 Wireless Client Mode Wireless Settings