ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 83)

Chapter 7 Wireless Security Screen
ZyXEL NWA-1100 User’s Guide
83
7.4.4 Security: WPA
This screen varies depending on whether you select Access Point or Wireless Client in the
Wireless > Wireless Settings screen.
7.4.4.1 Access Point
Use this screen to employ WPA as the security mode for your ZyXEL Device that is in Access
Point operating mode. Select WPA in the Security Mode field to display the following
screen.
Figure 37 Security: WPA for Access Point
The following table describes the labels in this screen.
Group-Key
Update
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 19 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
LABEL DESCRIPTION
Table 20 Security: WPA for Access Point
LABEL DESCRIPTION
Security Mode Choose WPA in this field.
ReAuthentication
Timer
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes). Alternatively, enter “0” to turn reauthentication off.
Note: If wireless station authentication is done using a
RADIUS server, the reauthentication timer on the
RADIUS server has priority.