ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 105)

Chapter 11 Remote Management
ZyXEL NWA-1100 User’s Guide
105
Figure 51 Remote Management: FTP
The following table describes the labels in this screen.
11.6 The WWW Screen
Use this screen to configure your ZyXEL Device via the World Wide Web (WWW) using a
Web browser. This lets you specify which IP addresses or computers are able to communicate
with and access the ZyXEL Device.
To change your ZyXEL Device’s WWW settings, click REMOTE MGNT > WWW. The
following screen shows.
Table 30 Remote Management: FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Secured Client
MAC Address
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the MAC address that you
specify to access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.