ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 - Manual (Page 189)

Appendix I How to Access and Use the CLI
ZyXEL NWA-1100 User’s Guide
189
Copy and Paste Commands
You can copy and paste commands directly from this document into your terminal emulation
console window (such as HyperTerminal). Use right-click (not [CTRL]-[V]) to paste your
command into the console window as shown next.
Using Shortcuts and Getting Help
This table identifies some shortcuts in the CLI, as well as how to get help.
1
Use of undocumented commands or misconfiguration can damage the unit
and possibly render it unusable.
Use the help command to view the executable commands on the ZyXEL Device. Follow
these steps to create a list of supported commands:
1 Log into the CLI.
2 Type help and press [ENTER]. A list comes up which shows all the commands
available for this device.
Table 76 CLI Shortcuts and Help
COMMAND / KEY(S) DESCRIPTION
yz
(up/down arrow keys) Scrolls through the list of recently-used commands. You can edit
any command or press [ENTER] to run it again.
? Displays the keywords and/or input values that are allowed in
place of the ?.
help Displays the (full) commands that are allowed in place of help.
ras> help
alarm chsh config
exit ip statistics switch
sys voip
ras>