Table 18 security: 802.1x only for wireless client – ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual
Page 81
Chapter 7 Wireless Security Screen
ZyXEL NWA-1100 User’s Guide
81
Figure 35 Security: 802.1x Only for Wireless Client
The following table describes the labels in this screen.
7.4.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
Use this screen to use 802.1x Static 64 or 802.1x Static 128 security mode for your ZyXEL
Device. Select 802.1x Static 64 or 802.1x Static 128 in the Security Mode field to display the
following screen.
Table 18 Security: 802.1x Only for Wireless Client
LABEL
DESCRIPTION
Security Mode
Choose the same security mode used by the AP.
Data Encryption
Select between None and Dynamic WEP. Refer to
for
information on using Dynamic WEP.
IEEE802.1x
Authentication
EAP Type
The options on the left refer to EAP methods. You can choose either TLS, LEAP,
PEAP or TTLS. The default value is PEAP.
The options on the right refer to authentication protocols. You can choose
between MSCHAPv2 and GTC.The default value is MSCHAPv2.
User Information
Username
Supply the username of the account created in the RADIUS server.
Password
Supply the password of the account created in the RADIUS server.
Apply
Click Apply to save your changes.
Reset
Click Reset to begin configuring this screen afresh.