beautypg.com

6 technical reference, 1 pre-defined ntp time servers list, Table 8 default time servers – ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

Page 58: 58 5.6 technical reference

background image

Chapter 5 System Screens

ZyXEL NWA-1100 User’s Guide

58

5.6 Technical Reference

This section provides some technical information about the topics covered in this chapter.

5.6.1 Pre-defined NTP Time Servers List

When you turn on the ZyXEL Device for the first time, the date and time start at 2000-01-01
00:00:00. When you select Auto in the System > Time Setting screen, the ZyXEL Device
then attempts to synchronize with one of the following pre-defined list of NTP time servers.

The ZyXEL Device continues to use the following pre-defined list of NTP time servers if you
do not specify a time server or it cannot synchronize with the time server you specified.

Start Date

Configure the day and time when Daylight Saving Time starts if you selected

Enable Daylight Saving. The at field uses the 24 hour format. Here are a

couple of examples:
Daylight Saving Time starts in most parts of the United States on the second

Sunday of March. Each time zone in the United States starts using Daylight

Saving Time at 2 A.M. local time. So in the United States you would select

Second, Sunday, March and 2:00.
Daylight Saving Time starts in the European Union on the last Sunday of

March. All of the time zones in the European Union start using Daylight Saving

Time at the same moment (1 A.M. GMT or UTC). So in the European Union

you would select Last, Sunday, March. The time you type in the at field

depends on your time zone. In Germany for instance, you would type 2

because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).

End Date

Configure the day and time when Daylight Saving Time ends if you selected

Enable Daylight Saving. The o'clock field uses the 24 hour format. Here are

a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of

November. Each time zone in the United States stops using Daylight Saving

Time at 2 A.M. local time. So in the United States you would select First,

Sunday, November and 2:00.
Daylight Saving Time ends in the European Union on the last Sunday of

October. All of the time zones in the European Union stop using Daylight

Saving Time at the same moment (1 A.M. GMT or UTC). So in the European

Union you would select Last, Sunday, October. The time you type in the at

field depends on your time zone. In Germany for instance, you would type 2

because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).

Apply

Click Apply to save your changes.

Reset

Click Reset to reload the previous configuration for this screen.

Table 7 System: Time

LABEL

DESCRIPTION

Table 8 Default Time Servers

ntp1.cs.wisc.edu

ntp1.gbg.netnod.se

ntp2.cs.wisc.edu

tock.usno.navy.mil