ZyXEL Communications NBG-417N User Manual
Page 71
Chapter 6 Tutorials
NBG-417N User’s Guide
71
Enter the following values for each service you want to add. For this tutorial, you
need to add each of the following service (see table below) and click Apply.
After adding these services, go to Management > Bandwidth MGMT >
Advanced and check if you have the correct values.
Figure 40 Tutorial: Bandwidth Allocation Example
Note: The Policy column displays either Max (maximum) or Min (minimum). This is
directly directed to the value in the Rate column. For example, you selected
Min and entered 30M as the rate for the VoIP service. The NBG-417N allocates
at least 30 megabytes for the VoIP service.
Refer to
Appedix F on page 253
for a list of common services that you can add in
the Bandwidth Mgnt screen.
Table 22 Services and Values
FIELDS
SERVICES
REAL AUDIO RTSP
VDO LIVE
FTP
Active
Check this to turn on this bandwidth management rule.
Direction
Select Both applies bandwidth management to traffic
that the NBG-417N forwards to both the LAN and the
WAN.
Select To WAN
LAN IP
Range
Enter 192.168.1.1 ~ 192.168.1.33.
Enter
192.168.1.34
Protocol
TCP
TCP or UDP TCP
TCP
Port Range
7070
554
7000
20 ~ 21
Policy
Min
Max
Rate
Select 30M as the minimum bandwidth allowed.
Select 64K
Apply
Click this to add the rule to the Bandwidth Allocation table.