ZyXEL Communications NBG-417N - Manual (Page 173)

Chapter 19 System
NBG-417N User’s Guide
173
19.4 Time Setting Screen
To change your NBG-417N’s time and date, click Maintenance > System >
Time Setting. The screen appears as shown. Use this screen to configure the
NBG-417N’s time based on your local time zone.
Figure 98 Maintenance > System > Time Setting
he following table describes the labels in this screen.
Table 62 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time and Date
Current Time
This field displays the time of your NBG-417N.
Each time you reload this page, the NBG-417N synchronizes the time
with the time server.
Current Date This field displays the date of your NBG-417N.
Each time you reload this page, the NBG-417N synchronizes the date
with the time server.
Time and Date Setup
Manual
Select this radio button to enter the time and date manually. If you
configure a new time and date, Time Zone and Daylight Saving at the
same time, the new time and date you entered has priority and the
Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the
last time configured manually.
When you set Time and Date Setup to Manual, enter the new time
in this field and then click Apply.