ZyXEL Communications NBG-417N - Manual (Page 113)

Chapter 9 LAN
NBG-417N User’s Guide
113
9.4 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 65 Network > LAN > IP
The following table describes the labels in this screen.
Table 42 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your NBG-417N in dotted decimal notation
192.168.1.1 (factory default).
IP Subnet Mask The subnet mask specifies the network number portion of an IP
address. Your NBG-417N will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG-417N.
Apply Click Apply to save your changes back to the NBG-417N.
Reset Click Reset to begin configuring this screen afresh.