ZyXEL Communications NBG-417N - Manual (Page 57)

Chapter 5 AP Mode
NBG-417N User’s Guide
57
5.4 Configuring Your Settings
Use this section to configure your NBG-417N settings while in AP Mode.
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-417N to
block access to devices or block the devices from
accessing the NBG-417N.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS
Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is
enabled.
WDS Use this screen to set up Wireless Distribution System
(WDS) on your NBG-417N.
LAN IP Use this screen to configure LAN IP address and subnet
mask or to get the LAN IP address from a DHCP server.
Maintenance
System General Use this screen to view and change administrative settings
such as system and domain names, password and
inactivity timer.
Time
Setting Use this screen to change your NBG-417N’s time and date.
Logs View Log Use this screen to view the logs for the categories that you
selected.
Tools Firmware Use this screen to upload firmware to your NBG-417N.
Configuratio
n Use this screen to backup and restore the configuration or
reset the factory defaults to your NBG-417N.
Restart This screen allows you to reboot the NBG-417N without
turning the power off.
Sys OP
Mode
General This screen allows you to select whether your device acts
as a Router or a Access Point.
Language This screen allows you to select the language you prefer.
Table 20 Menu: AP Mode
LINK TAB FUNCTION