Troubleshooting, 1 power, hardware connections, and leds, Chapter 24 troubleshooting – ZyXEL Communications NBG-417N User Manual
Page 191: Troubleshooting (191)
NBG-417N User’s Guide
191
C
H A P T E R
24
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
•
•
Resetting the NBG-417N to Its Factory Defaults
•
Wireless Router/AP Troubleshooting
24.1 Power, Hardware Connections, and LEDs
The NBG-417N does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the NBG-417N.
2
Make sure the power adaptor or cord is connected to the NBG-417N and plugged
in to an appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the NBG-417N.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
2
Check the hardware connections. See the Quick Start Guide.