ZyXEL Communications NBG-417N - Manual (Page 199)

NBG-417N User’s Guide
199
C
H A P T E R
25
Product Specifications
The following tables summarize the NBG-417N’s hardware and firmware features.
Table 67 Hardware Features
Dimensions (W x D x
H) 140 mm x 110 mm x 30 mm
Weight 190 g
Power Specification Input: 120~240 AC, 50~60 Hz
Output: 12 V DC 1A
Ethernet ports Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
4-5 Port Switch A combination of switch and router makes your NBG-417N a cost-
effective and viable network solution. You can add up to four
computers to the NBG-417N without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the NBG-417N when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
LEDs PWR, LAN1-4, WAN, WLAN/WPS
Reset Button The reset button is built into the rear panel. Use this button to
restore the NBG-417N to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
WPS button Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
Antenna The NBG-417N is equipped with a 2dBi (2.4GHz) detachable
antenna to provide clear radio transmission and reception on the
wireless network.
Operation
Environment Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Storage Environment Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%