Static route, 1 overview, 2 what you can do – ZyXEL Communications NBG-417N User Manual
Page 145: Chapter 15 static route, 1 overview 15.2 what you can do, Static route (145)
NBG-417N User’s Guide
145
C
H A P T E R
15
Static Route
15.1 Overview
This chapter shows you how to configure static routes for your NBG-417N.
This chapter shows you how to configure static routes for your NBG-417N.
Each remote node specifies only the network to which the gateway is directly
connected, and the NBG-417N has no knowledge of the networks beyond. For
instance, the NBG-417N knows about network N2 in the following figure through
remote node Router 1. However, the NBG-417N is unable to route a packet to
network N3 because it doesn't know that there is a route through the same
remote node Router 1 (via gateway Router 2). The static routes are for you to tell
the NBG-417N about the networks beyond the remote nodes.
Figure 79 Example of Static Routing Topology
15.2 What You Can Do
• Use the IP Static Route screen (
) to view existing
static route rules.
• Use the Static Route Setup screen (
) to add or edit
a static route rule.