ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series - Manual (Page 437)

P-662H/HW-D Series User’s Guide
Appendix M Internal SPTGEN 437
A
P P E N D I X
M
Internal SPTGEN
Internal SPTGEN Overview
Internal SPTGEN (System Parameter Table Generator) is a configuration text file useful for
efficient configuration of multiple ZyXEL Device. Internal SPTGEN lets you configure, save
and upload multiple menus at the same time using just one configuration text file – eliminating
the need to navigate and configure individual SMT menus for each ZyXEL Device.
The Configuration Text File Format
All Internal SPTGEN text files conform to the following format:
allowed = input>,
where < input > is your input conforming to < parameter values allowed >.
The figure shown next is an example of an Internal SPTGEN text file.
Figure 263 Configuration Text File Format: Column Descriptions
Note: DO NOT alter or delete any field except parameters in the Input column.
For more text file examples, refer to the Example Internal SPTGEN Screens Appendix.
Internal SPTGEN File Modification - Important Points to Remember
Each parameter you enter must be preceded by one “=”sign and one space.
/ Menu 1 General Setup
10000000 = Configured <0(No)| 1(Yes)> = 1
10000001 = System Name = ZyXEL
10000002 = Location =
10000003 = Contact Person’s Name =
10000004 = Route IP <0(No)| 1(Yes)> = 1
10000005 = Route IPX <0(No)| 1(Yes)> = 0
10000006 = Bridge <0(No)| 1(Yes)> = 0