1 multiple ssid commands, Figure 78 multiple ssid network example – ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual
Page 148
P-662H/HW-D Series User’s Guide
148
Chapter 7 Wireless LAN
Figure 78 Multiple SSID Network Example
In this section the second wireless network is referred to as the “guest wireless network” and
user’s connecting to this network are referred to as “guests”.
Multiple SSID is only configurable via commands. The next sections describe multiple SSID
commands and show a configuration example. See
for information
on the command structure and how to access the CLI (Command Line Interface) on the
ZyXEL Device.
7.10.1 Multiple SSID Commands
Use the
wlan mssid
commands to configure multiple SSID on the ZyXEL Device. The
commands must be entered in the following syntax:
wlan mssid guestssid
wlan mssid mode [0:disable guestssid 1:enable guestssid] [0:disable
-> intranet blocking 1:enable intranet blocking]
wlan mssid setprivacy type <0:NO 1:WEP64 2:WEP128 3:WEP256>
wlan mssid setprivacy key <1-4>
wlan mssid setprivacy defaultkey <1-4>
wlan mssid guest_autoOff < <1:on, 0:off>
wlan mssid show