Linux, Figure 228 macintosh os x: network, Verifying settings – ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual
Page 384
P-662H/HW-D Series User’s Guide
384
Appendix D Setting up Your Computer’s IP Address
Figure 228 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•
From the Configure box, select Manually.
•
Type your IP address in the IP Address box.
•
Type your subnet mask in the Subnet mask box.
•
Type the IP address of your ZyXEL Device in the Router address
box.
5 Click Apply Now and close the window.
6 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.
This manual is related to the following products: