ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series - Manual (Page 216)

P-662H/HW-D Series User’s Guide
216 Chapter 14 Content Access Control
14.2 Activating CAC and Creating User Groups
From the main menu click Security > Content Access Control and General to open the
configuration screen.
Use this screen to activate Content Access Control and set up the four user groups.
Note: You must set up all four user groups.
Figure 116 Content Access Control: General
The following table describes the labels in this screen.
Table 78 Content Access Control: General
LABEL DESCRIPTION
Enable
Content
Access
Control
Select the check box to allow the LAN administrator to have control over a LAN user’s
Internet access.
Idle Timeout Type the time in minutes that elapses before the ZyXEL Device automatically
terminates the Internet session. The default time is 10 minutes.
Group List These groups are used in conjunction with content filtering to decide which web pages
cannot be accessed by the user. You can set up to four user groups.
Group Name Enter the name of a user group for identification purposes.
Restrictions Use the links below to configure the access restrictions for the user group.
Time Click the Edit ( )icon to set up the time allowances, start times and end times of the
day(s) when access is allowed.