ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series - Manual (Page 421)

P-662H/HW-D Series User’s Guide
Appendix I Certificates Commands 421
A
P P E N D I X
I
Certificates Commands
The following describes the certificate commands. See Appendix H on page 419 for
information on the command structure.
All of these commands start with certificates.
Table 166 Certificates Commands
COMMAND DESCRIPTION
my_cert
create
create selfsigned
[key size] Create a self-signed local host certificate.
specifies a descriptive name for the
generated certificate. specifies a
subject name (required) and alternative name
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains
spaces, please put it in quotes. [key size]
specifies the key size. It has to be an integer
from 512 to 2048. The default is 1024 bits.
create request
[key size] Create a certificate request and save it to the
router for later manual enrollment.
specifies a descriptive name for the generated
certification request. specifies a
subject name (required) and alternative name
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains
spaces, please put it in quotes. [key size]
specifies the key size. It has to be an integer
from 512 to 2048. The default is 1024 bits.
create scep_enroll
addr> cert> key>
[key size] Create a certificate request and enroll for a
certificate immediately online using SCEP
protocol. specifies a descriptive name
for the enrolled certificate. specifies
the CA server address. specifies the
name of the CA certificate. specifies
the key used for user authentication. If the key
contains spaces, please put it in quotes. To
leave it blank, type "". specifies a
subject name (required) and alternative name
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains
spaces, please put it in quotes. [key size]
specifies the key size. It has to be an integer
from 512 to 2048. The default is 1024 bits.