ZyXEL Communications Prestige 480 - Manual (Page 90)

Prestige 480 Dual BRI ISDN Router
4-4 Remote Node Configuration
This field determines whether or not your Prestige will call back
after receiving a call from this remote node.
If this option is enabled, your Prestige will disconnect the initial
call from this node and call it back at the Outgoing Primary
Phone Number (see below).
Outgoing: My Login
Name This is a required field [?] if Call Direction is either Both or
Outgoing. Enter the login name for your Prestige when it calls
this remote node.
Outgoing: My
Password This is a required field [?] if Call Direction is either Both or
Outgoing. Enter the password for your Prestige when it calls this
remote node.
This field sets the auth entication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your Prestige will accept either CHAP or PAP
when requested by this remote node.
CHAP/ PAP
CHAP - accept CHAP only. CHAP
Outgoing: Authen
PAP - accept PAP only. PAP
Outgoing: Pri(mary)
Sec(onda
ry) Phone
Numbers Your Prestige always calls this remote node using the Primary
Phone number first for a dial-up line.
If the Primary Phone number is busy or does not answer, your
Prestige will dial the Secondary Phone number if available.
Some areas require dialing the pound sign # before the phone
number for local calls. A # symbol may be included at the
beginning of the phone numbers as required.
Edit PPP Options To edit the PPP options for this remote node, move the cursor to
this field, use the space bar to select Yes and press [Enter]. This
will bring you to Menu 11.2 - Remote Node PPP Options. For
more information on configuring PPP options, see the section
Editing PPP Options. Press space
bar to toggle
Yes then
press
[Enter]
Rem IP Addr Enter the IP address of the remote gateway.
Telco Options:
Allocated Budget (min)
This field sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 for no budget control. Default = 0
Period (hr) This field sets the time interval to reset the above outgoing call
budget control.
Transfer Type This field specifies the type of connection between the Prestige
and this remote node. When set to Leased, the Allocated 64k/