Set this field to required – ZyXEL Communications Prestige 480 User Manual

Page 138

Prestige 480 Dual BRI ISDN Router

8-16

Dial-In Server Configuration

Menu 13

Figure 8-14 Configuring CLID with Callback

Testing your Connection with Callback and CLID

Go to Menu 24.8 (Prestige on LAN 2) and type “sys trcl call”. The Prestige displays all communication

traces as shown in the next figure. If CLID authentication fails, this means that the calling number does not

match the Rem CLID number in Menu 11.1.

Menu 13 - Default Dial -in Setup

Telco Options:

CLID Authen= Required

PPP Options:

Recv Authen= CHAP/PAP
Compression= Yes

Mutual Authen= No

PAP Login= N/A

PAP Password= N/A

Multiple Link Options:

Max Trans Rate= 256

Callback Budget Management:

Allocated Budget(min)=
Period(hr)=

IP Address Supplied By:

Dial -in User= Yes

IP Pool= No

IP Start Addr= N/A

IP Count(1,4)= N/A

Session Options:

Edit Filter Sets= No

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Set this field

to Required