ZyXEL Communications Prestige 480 - Manual (Page 220)

Prestige 480 Dual BRI ISDN Router
15-6 IP Policy Routing
port start= /
end= Source port number range from start to end; applicable only for TCP/UDP.
Destination:
addr start= /
end= Destination IP address range from start to end.
port start= /
end= Destination port number range from start to end; applicable only for TCP/UDP.
Action= Specifies whether action should be taken on criteria Matched or Not Matched.
Gateway type Allows you to choose the outgoing gateway type. The gateway can be on
the same subnet as the Prestige if it’s on the LAN, otherwise, the
gateway can be the IP address of a remote node. You can choose
Gateway addr if you want to assign the gateway IP address by
yourself. Or you can specify the remote node as your gateway by
choosing Gateway node.
Gateway addr Enter the IP address of your gateway.
Gateway node This can be set as 0 to 12. 0 means no change. 1 means remote node 1 in
Menu 11 and so on.
Type of Service Set the new TOS value of the outgoing packet. Choose from Prioritize incoming
network traffic by choosing from No Change / Normal / Min Delay / Max
Thruput / Max Reliability.
Precedence Set the new precedence value of the outgoing packet. Values range from 0 to 7
or No Change.
Log Press the spacebar to select Yes to make an entry in the system log when a
policy is executed.