ZyXEL Communications Prestige 480 - Manual (Page 205)

Prestige 480 Dual BRI ISDN Router
Backup, Restore and Upload 14-5
Please note that the system reboots automatically after the file transfer process is complete.
Figure 14-5 Menu 24.6 –Restore Configuration using the Console Port
Step 1. Go to Menu 24.6 .
Step 2. Press “Y” to indicate that you want to continue. The following procedure is for the
HyperTerminal program. The procedure for other serial communications programs should be
similar.
Step 3. Click “Transfer” in the HyperTerminal toolbar, then “Send File” in the popup menu to display the
following screen.
Figure 14-6 Send File
Step 4. Enter where the rom configuration file is on your computer, and make sure you choose
the X-Modem Protocol. Then press “Send”.
Step 5. After a successful restoration you will see the following screen. Press any key to return
to reboot the system
.
Menu 24.6 - Restore Configuration
FTP or TFTP are the preferred methods for restoring your current workstation
configuration to your Prestige since FTP or TFTP is faster. Please note that
the system reboots automatically after the file transfer process is complete.
Choose the
X-Modem
Protocol.
Enter where you want to place
the rom configuration file on
your computer.
Save to ROM
Hit any key to start system reboot.