ZyXEL Communications Prestige 480 - Manual (Page 180)

Prestige 480 Dual BRI ISDN Router
13-4 System Maintenance
Speed Shows the current connecting speed.
TxPkts Shows the number of transmitted packets on this channel.
RxPkts Shows the number of received packets on this channel.
Errors Shows the number of error packets on this channel.
CLU (Current Line Utilization) percentage of current bandwidth used on this channel
ALU (Average Line Utilization) a 5-second moving average of channel usage for this
channel.
Up Time Shows the time this channel has been connected to the current remote node
Ethernet (Ethernet connection).
Status Shows the current transmission speed and mode of the LAN.
TxPkts Shows the number of transmitted packets to the LAN.
RxPkts Shows the number of received packets from the LAN.
Collisions Shows the number of collisions.
LAN Packet
Which Triggered
Last Call Shows the first 48 octets of the LAN packet that triggered the last outgoing call.
Total Outcall Time Shows the total outgoing call time for both B1 and B2 channels since the system
has been powered up.
CPU Load Specifies the percentage of CPU utilization.
Press Command:
COMMANDS
1 Drops the B1 channel of ISDN line 1.
2 Drops the B2 channel of ISDN line 1.
3 Drops the B1 channel of ISDN line 2.
4 Drops the B2 channel of ISDN line 2.
5 Resets counters means that all statistics, except Uptime are reset to zero.
6 Drop All means all ISDN line channels are dropped.
9 Toggles status means you can see alternative information such as the Prestige IP
address and CLID as well as the peer's IP address and CLID (see next figure).
ESC Exits this menu and takes you back to the previous menu.