ZyXEL Communications Prestige 480 - Manual (Page 54)

Prestige 480 Dual BRI ISDN Router
2-14 Hardware Installation and Setup
Table 2-5 Menu 2.1 – ISDN Basic Setup
Field Description.
ISDN Line Refers to ISDN line 1 or line 2 setup that you selected in Menu 2 - ISDN Setup
Switch Type This field is fixed as DSS-1 for European switches.
In general, this will be Switch/Switch (the default). If you are only using one B
channel (e.g., your Prestige is sharing the ISDN BRI line with another device),
then select Switch/Unused. If your second B channel is a leased line, select
Switch/Leased. Press the [Space bar] to toggle through all the options. These
options are B Channel Usage
Switch/Switch
Switch/Leased
Leased/Switch
Leased/Unused
Unused/Leased
Leased/Leased
Switch/Unused
Incoming Phone
Number Matching Determines how incoming calls are routed.
ISDN Data Enter the telephone number assigned to ISDN data calls for the Prestige. The
maximum number of digits is 25 for the telephone number.
Edit Advanced Setup Select Yes and press [Enter] to go to the advanced setup submenu. See below.
2.11.1 Advanced Setup
Select Yes in the Advanced Setup field of Menu 2.1 – ISDN Basic Setup to display Menu 2.1.1.
Menu 2.1.1 - ISDN Advanced Setup
ISDN Line= 1
Calling Line Indication= Enable
PABX Outside Line Prefix=
PABX Number (Include S/T Bus Number) for Loopback=
Outgoing Calling Party Number:
ISDN Data =
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.