Zoom HD16 - Manual (Page 150)

ZOOM HD8/HD16 150
Reference [Projects]
This section describes how to perform operations for entire projects.
On the HD8/HD16, the data needed to reproduce a song you
create are managed in units called “projects”. By loading a
project from the hard disk, you can always go back to exactly
the same condition that existed when the project was saved. A
project contains the following information.
• Audio data recorded on V-takes 1 – 10 of all audio
tracks and the master track
• Numbers of selected V-takes for each track
• Mixer settings
• Settings saved in scene numbers 0 – 99
• Scene parameter enabled/disabled settings
• Numbers and settings of patches currently selected
for insert effect/send return effects
• Rhythm patterns
• Rhythm songs
• Selected kit file
• Selected bass program
• Audio data in phrase pool
• Playlist contents
• Other required files
NOTE
Recording/playback operations can be performed only for the
currently loaded project. It is not possible to perform functions
for multiple projects simultaneously.
This section explains operations such as loading or saving a
project. The procedure is the same for most project operations.
The basic procedure is as follows.
1.
From the main screen, press the [PROJECT/
UTILITY] key.
The display indication changes as follows.
2.
Verify that “PROJECT” is being shown on the
second line of the display, and press the
[ENTER] key.
If the indication is not shown, use the cursor left/right keys to
bring up the indication “PROJECT” and then press the
[ENTER] key.
The project menu appears, allowing you to select the desired
project operation.
3.
Use the cursor left/right keys to select one of
the following operations.
● SELECT
Load a previously saved project from the internal hard disk.
● NEW
Create a new project.
● SIZE
View the size of the currently loaded project.
● COPY
Duplicate a specified project on the hard disk.
● ERASE
Erase a specified project from the hard disk.
● NAME
Edit the name of the currently loaded project.
About projects Project operations
REC UTILITY 1/10 REC UTILITY 1/10
>PROJECT
>PROJECT
PROJECT 1/8 PROJECT 1/8
>SELECT
>SELECT