Zoom HD16 - Manual (Page 147)

Reference [Creating a CD]
ZOOM HD8/HD16 147
NOTE
When a backup spans several discs, the discs must be used in
the same order for restore. Be sure to note the disc number on
the case and label of the disc.
HINT
When the disc has been ejected, it is possible to abort the
backup operation. To do this, press the [EXIT] key while the
“Insert” indication is shown. The indication will change to
“Cancel?”. Press the [ENTER] key to terminate the process.
10 .
To return to the main screen, press the [EXIT]
key several times.
You can save all projects on the hard disk to CD-R/RW media
for backup.
If the total size of all projects is larger than the capacity of one
CD-R/RW disc, the backup will automatically extend over
multiple volumes, with lower-numbered projects being placed
on lower-numbered discs.
NOTE
Also if projects were saved in one operation, restoring will be
on a single-project basis.
1.
Insert a CD-R/RW disc into the integrated
CD-R/RW drive.
To back up projects, use a blank CD-R/RW disc or a CD-RW
disc that has been completely erased.
2.
From the main screen, hold down the [SHIFT]
key and press pad 1 (CD-R/RW).
The menu for various CD-R/RW functions appears.
3.
Use the cursor left/right keys to bring up the
indication “BACK UP” on the second line of
the display, and press the [ENTER] key.
The display indication changes as follows.
4.
Use the cursor left/right keys to bring up the
indication “ALL SAVE” on the second line of
the display, and press the [ENTER] key.
The display shows the space required for the backup of all
projects in MB (megabytes).
5.
Press the [ENTER] key.
The display indication changes as follows.
6.
To execute the backup, press the [ENTER]
key. To cancel, press the [EXIT] key instead.
When you press the [ENTER] key, backup starts from the
project with the lowest number. The display shows the disc
number, the project number, and the indication “Burning”.
When the backup is finished, the display indication changes to
“Complete!”.
If the backup size is larger than the capacity of one CD-R/RW
disc, the disc will be ejected after it has been filled up, and the
display indication changes as follows.
Saving all projects to CD-R/RW
disc
PRJ 000
PRJ 000
PRJ 001
PRJ 001
PRJ 002
PRJ 003
PRJ 004
PRJ 001
PRJ 002
PRJ 002
PRJ 003
PRJ 004
Disc 1
Disc 2
Disc 3
HD8/HD16
Backup
BACK UP 1/4 BACK UP 1/4
>SAVE
>SAVE
Total Total
1137MB
1137MB
All Project All Project
Save?
Save?
Disc1 Disc1
Burning No.4
Burning No.4
Project currently being saved
Disc number
Insert Insert
Disc2 No.5
Disc2 No.5