Xerox FaxCentre F116 - Manual (Page 85)

Operation
- 81 -
Op
er
atio
n
Se
ttin
g up
y
ou
r
mach
ine
Ge
tti
ng
sta
rt
ed
Direc
to
ry
M
ainte
na
nc
e
Sa
fe
ty
Co
nt
en
ts
Insta
lla
tio
n
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Utilisation.fm
To print the logs:
M 52 OK - PRINT / LOGS
The incoming and outgoing logs are printed on the same page.
P
RINTING THE FUNCTIONS LIST
You may print the functions list of your machine at any time.
To print the functions list:
M 51 OK - PRINT / FUNCTIONS LIST
P
RINTING THE MACHINE SETTINGS
At any moment, you may print the list of your parameter settings to control any changes possibly
made to the default parameters.
Printing the machine settings:
M 54 OK - PRINT / SETUP
Your machine prints the list of stored parameters.
P
ROGRAMMING SPEED DIALS
You may programme speed dials of keys (for example, to send a fax directly to one or multiple
group dial, to call this group dial or to get access to a specific menu, etc.).
This sequence is registered in one of the keys F1 or F2 (as you want).
Then, by pressing one of these keys, you will execute the registered sequence.
NOTE : By default, Scan to PC function is programmed on F1 key and Scan to FTP function is programmed
on F2 key.
To register a sequence (for example, in key
F1
).
Press key M ENU , then F1: you will enter the menu option
From this moment, all the key pressings are memorized in the key F1.
Press key F1 to register the sequence if you are still in the menus. The sequence
memorizing is automatic if you have already exited the menu.
Example: to memorize a fax sending to various group dial in key F1:
Press keys M ENU then F1.
Press keys 3, 1 then OK.
Enter the group dial fax machine number.
Press key and enter the second group dial fax machine number or subscribers list.
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 81 Mercredi, 11. août 2004 4:48 16