Xerox FaxCentre F116 - Manual (Page 80)

- 76 -
Operation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Utilisation.fm
Enhanced copy
Position the document face down (refer to paragraph Document positioning, page 65).
Press key .
Enter the desired number of copies and press OK to confirm.
Choose FAST , QUALITY or PHOTO resolution with the keys or , then press OK to
confirm.
Set the desired zoom value 25% TO 400% with keys or and the numerical keypad, then
press OK to confirm.
Choose the copy output type between COPY ASSEMBLED or NOT ASSEMBLED and press OK
to confirm.
Set the required origin values with keys or the numerical keypad and press OK to
confirm.
Set the required contrast value with keys or and press OK to confirm.
Set the required brightness value with keys or and press OK to confirm.
Choose the type of paper NORMAL PAPER , THICK with keys or and press OK to
confirm.
Choose the paper tray, AUTOMATIC TRAY , UPPER TRAY or LOWER TRAY with keys or
and press OK to confirm.
S
PECIFIC COPY SETTINGS
When the copy quality is no longer satisfactory, you can perform a calibration.
To do so, refer to paragraph Scanner calibration, page 110.
Moreover, a high number of controls let you improve the copy quality.
Scanner settings
• RESOLUTION to set the photocopy resolutation.
• ZOOM settings to reduce or magnify any portion of a document by choosing the origin and value
of the zoom to apply to that portion.
• The assembly parameter to choose between ASSEMBLED or NOT ASSEMBLED copies.
• The ORIGIN parameter to choose the origin to be applied to the document.
• CONTRAST to choose the photocopy contrast.
• BRIGHTNESS is used to make your original document lighter or darker.
• L/R MARGINS to shift the margins or your original document to the left or to the right.
• A4 or LETTER to choose the format.
machine settings
• PAPER is used to tell your machine what type of paper you use by default.
• TRAY is used to tell your machine which paper tray shoud be used by default.
• L/R MARGINS to shift the margins of your document to the left or to the right.
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 76 Mercredi, 11. août 2004 4:48 16