Access to servers parameters – Xerox FaxCentre F116 User Manual
Page 54
- 50 -
Setting Up Your Machine
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Configuration.fm
Enter connection
IDENTIFIER
1
,
press OK.
Enter connection
PASSWORD
, press OK.
M 922 OK - INTERNET / INIT PROVIDER / MESS. SERV
Enter Email
IDENTIFIER,
press OK.
Enter Email
PASSWORD,
press OK.
Enter
E-MAIL ADR
, press OK.
Access to servers parameters
M 923 OK - INTERNET / INIT PROVIDER / SERVERS
Enter
SMTP
, press OK.
Enter
POP3
, press OK.
Enter
DNS 1
(primary), press OK.
Enter
DNS 2
(secondary), press OK.
Access to the authentification SMTP parameters
M 924 OK - INTERNET / INIT PROVIDER / SMTP AUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
In the PARAMETERS menu, select ID.MESS.SERV to keep the same identification parameters as
in the messaging service or AUTHENT. SPEC. to define other identification parameters, then
validate with Access to SMTP authentification parameters
by pressing OK key. When you select AUTHENT. SPEC, carry out the two following operations:
Enter the IDENTIFIER then validate with OK key.
Enter the PASSWORD then validate with OK key.
Sample Internet settings for the machine (56 kbps modem)
Your access provider should give you the following information:
1.
If the identifier has more than 16 characters, the text will automatically slide over to the left.
CALL NUMBER:
08 60 00 10 00
CONNECTION IDENTIFIER:
CONNECTION PASSWORD:
*****
MESSAGE SERVICE IDENTIFER:
demo jt12
MESSAGE SERVICE PASSWORD:
*****
E-MAIL ADDRESS:
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 50 Mercredi, 11. août 2004 4:48 16