Xerox 701P44973 - Manual (Page 90)

4 Scan
82 Xerox 6204 Wide Format Solution
S
can
4
Halftone (Selecting the Halftone Type for Scanning the Original)
You can select the gradation settings for the scan of the original.
1
Select the halftone.
„ Binary
This reproduces images with white and black in
two gradations.
„ Error Diffusion
Select this item when scanning an original that
needs to be reproduced with halftones, such as
photos.
Reduce/Enlarge (Specifying the Ratio for the Scan Job)
You can set the ratio at which the original is either reduced or enlarged during
scanning, based on a percentage of the original.
1
Select [Reduce/Enlarge].
2
Select the desired ratio.
You can change the ratios displayed. For information about this procedure, refer to "Reduce / Enlarge
Buttons (Changing Preset Values)" (P.136).
„ Variable ratios
You can enter any ratio for scanning. Set the ratio within the range of 25% to 400% in
0.1% increments. Touch the entry area for numerical values. Enter the numerical
values using the numeric keypad, [ ][ ] in 1% increments, or [+0.1][-0.1] in 0.1%
increments.
„ 100.0%
Scanned image will be the same size as the original.
„ Presets (Six Types)
Select from six preset scan ratios.
You can change the ratios displayed. For information about this procedure, refer to "Reduce / Enlarge
Buttons (Changing Preset Values)" (P.136).
100.0%
Variable ratios Presets (Six Types)