Preparation for scanning, Items you set on the xerox 6204 wf solution, Items you install on your computer – Xerox 701P44973 User Manual

Page 78: Establish network settings, Create a mailbox, Establish network settings create a mailbox

4 Scan

Xerox 6204 Wide Format Solution

can

Preparation for Scanning

This section describes the basic steps you need to take before you start scanning on

the Xerox 6204 Wide Format Copier Printer.

Items you set on the Xerox 6204 WF Solution

Set the network settings on the machine.
Set up a mailbox to receive the scanned documents - which are saved to the
designated mailbox in the machine first. This mailbox must be created and
registered before you start scanning.

Items you install on your computer

Install the software on the machine that saves the scanned document.
There are two types of software: "Wide Format Network TWAIN Source" (also
referred to as the Scanner Driver) and " Wide Format Scan Service".

Establish Network Settings

Set the network settings on the machine.
For the steps to establish your network settings, refer to "Network Settings" (P.138).

Create a Mailbox

You can create up to 50 mailboxes on the machine.
See the section "Creating a Mailbox" (P.91) later in this chapter for more details on this

process.

Installing Wide Format

Network TWAIN Source

Items you set on the Xerox 6204 WF

Items you install on your computer

Installing Wide Format
Scan Service