Xerox 701P44973 - Manual (Page 51)

Copying Procedure
Xerox 6204 Wide Format Solution 43
Co
p
y
3
Step 2 Entering the Quantity
You can enter up to 99 copies as the quantity.
1
Enter the number of copies using the numeric
keypad.
The number of copies entered appears on the upper right
area of the touch screen.
2 If you enter an incorrect value, press the
button to clear the entry, and enter the correct
value.
Step 3 Scanning the Original
To scan the original, follow the procedure below.
Important • The original may jam if pressure is applied to the top of the original or it is pulled during
scanning.
• When originals that contain holes are loaded, make sure that the area with the holes is fed in
last, because the original may jam if the area with the holes is fed in first.
1
Align the original with the original guide face
down, and insert the lead edge of the original
into the machine until it stops feeding. Then the
machine starts scanning automatically.
• If the scan start mode has been set to [Manual
Start], press the button.
Important • Hold the original down flat with two hands (one
on either side of the arrow in the graphic) while
it is being fed in to the starting position
(to avoid minor "crinkles" that can cause dark
areas in the copy). If you release the original
before it stops feeding, it may result in a jam.
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy Scan Menu Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
. C
1
Numeric keypad
Basic Copy Image Quality More Features
Media Supply Media Type
Select
2 A1
Media Cut Mode
Standard
Bond
Bond
Vellum
Film
Reduce / Enlarge
100.0%
A0 A2
More...
More...
Auto %
Auto
50.0%
Ready to copy
1
Qty.
1 A0
Bond
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy Scan Menu Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
. C
1
button
Original Guide