Xerox 701P44973 - Manual (Page 142)

7 System Administration
134
S
yst
em Ad
min
ist
ra
tio
n
7
Copy Defaults
You can set the default copy features. When the
power is turned on or the machine returns from a
power-saving state, or when the
button is pressed, these default settings take
effect. By setting the defaults to commonly used
features, you can reduce the number of setting
operations required in use.
1
Select [Copy Defaults].
2
Select the items to be set or changed.
3 Select the desired value to set.
4 Select [Save].
5
Select [Close].
Items Notes
Default when
shipped form
the factory
Reduce / Enlarge Set the default value for [Reduce/Enlarge] on the
[Basic Copy] screen.
Select the magnification from the six buttons
registered as R/E Preset buttons, [100%], and
[Auto %], a total of eight possibilities.
When the default setting for [Media Supply] is
[Auto], for [Reduce/Enlarge] it is not possible to
set [Auto %].
For information about R/E Preset buttons, refer to
"Reduce / Enlarge Buttons (Changing Preset Values)"
(P.136). 100.0%
Media Supply Set the default value for [Media Supply] on the
[Basic Copy] screen.
When the default setting for [Reduce / Enlarge] is
[Auto %], for [Media Supply] it is not possible to
set [Auto]. Auto Select
Media Type Set the default value for [Media Type] on the
[Basic Copy] screen.
Select the media type from [Ordinary], [Tracing],
and [Film]. Bond
Copy Defaults Save
100.0%
Auto Select
Bond
Standard
Text/Line
Normal
1
2
3
Items Current Settings
1. Reduce / Enlarge
2. Media Supply
3. Media Type
4. Media Cut Mode
5. Original Type
6. Copy Density
Copy Defaults Save
1
2
3
Items Current Settings
7. BG. Suppress.
8. Contrast
9. Image Location
10. Edge Erase
11. Scan Start
12. Margins
On
Normal
Normal Erase
0 mm
L: 0 mm T: 0 mm
No Shift
Copy Defaults save
1
2
3
Items Current Settings
13. Collation
14. Mirror Image
15. Invert Image
Uncollated
Off
Off