Xerox 701P44973 - Manual (Page 62)

3 Copy
54 Xerox 6204 Wide Format Solution
Co
py
3
[Reduce/Enlarge] screen
You can select a ratio that does not appear on the [Basic Copy] screen.
1 Select [More...].
„ Variable ratios
You can enter any ratio for copying. Set the ratio within the range from 25% to 400% in
0.1% increments. Touch the entry area for numerical values. Enter the numerical
values using the numeric keypad, [ ][ ] in 1% increments, or [+0.1][-0.1] in 0.1%
increments.
„ 100.0%
Copies are made at the same size as the original.
„ Auto %
The copy ratio is automatically set based on the size of the original and paper media
size, and the original is copied to fit in the selected media.
You cannot select both [Auto%] for [Reduce/Enlarge] and [Auto Select] for [Media
Supply] at the same time.
„ Presets (Six Types)
Select from six preset copy ratios.
You can change the indicated ratios. For information about the change procedure, refer to "Reduce /
Enlarge Buttons (Changing Preset Values)" (P.136).
„ Calculator %
You can specify a different size for the height and width.
If you specify both the original size and the copy size, the copy ratios for the height and
width are calculated automatically according to the sizes that you entered. The
calculation results are indicated by copy ratios within the range from 25% to 400%.
Reduce / Enlarge
(25.0 - 400.0)
+0.1
-0.1
Calcula-
tor %
Cancel
100.0%
Auto%
25.0%
50%
200%
70.7%
141.1%
35.3%
A0 A4
Save
A0 A3
A0 A2
A1 A3
A4 A3
A2 A1
A2 A0
A3 A1
A1 A2
A0 A1
A1 A4
%
100.0%
Calculator %
Auto %
Variable ratios
Presets (Six Types)