ZyXEL Communications ZyXEL ZyWALL 2WE - Manual (Page 91)

ZyWALL 2 and ZyWALL 2WE
Internet Access 9-1
Chapter 9
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
9.1 Introduction to Internet Access Setup
Use information from your ISP along with the instructions in this chapter to set up your ZyWALL to access
the Internet. There are three different menu 4 screens depending on whether you chose Ethernet, PPTP or
PPPoE Encapsulation. Contact your ISP to determine what encapsulation type you should use.
9.2 Ethernet Encapsulation
If you choose Ethernet in menu 4 you will see the next screen.
Figure 9-1 Menu 4: Internet Access Setup (Ethernet)
The following table describes this screen.
Table 9-1 Menu 4: Internet Access Setup Menu Fields
FIELD DESCRIPTION
ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This information is
for identification purposes only.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: