ZyXEL Communications ZyXEL ZyWALL 2WE User Manual
Page 395
ZyWALL 2 and ZyWALL 2WE
Firewall Commands
63
Chart N-1 Firewall Commands
FUNCTION
COMMAND
DESCRIPTION
config edit firewall set
rule
This command sets a rule to have the ZyWALL
check for traffic going to this range of addresses.
config edit firewall set
rule
This command sets a rule to have the ZyWALL
check for TCP traffic with this destination address.
You may repeat this command to enter various,
non-consecutive port numbers.
config edit firewall set
rule
This command sets a rule to have the ZyWALL
check for TCP traffic with a destination port in this
range.
config edit firewall set
rule
This command sets a rule to have the ZyWALL
check for UDP traffic with this destination address.
You may repeat this command to enter various,
non-consecutive port numbers.
config edit firewall set
rule
This command sets a rule to have the ZyWALL
check for UDP traffic with a destination port in this
range.
D
D
e
e
l
l
e
e
t
t
e
e
config delete firewall e-mail
This command removes all of the settings for e-mail
alert.
config delete firewall attack
This command resets all of the attack response
settings to their defaults.
config delete firewall set
This command removes the specified set from the
firewall configuration.
config delete firewall set
rule
This command removes the specified rule in a
firewall configuration set.