ZyXEL Communications ZyXEL ZyWALL 2WE - Manual (Page 101)

ZyWALL 2 and ZyWALL 2WE
Remote Node Setup 10-3
Table 10-1 Fields in Menu 11.1
FIELD DESCRIPTION EXAMPLE
Service Type Press [SPACE BAR] and then [ENTER] to select from Standard,
RR-Toshiba (RoadRunner Toshiba authentication method) or RR-
Manager (RoadRunner Manager authentication method). Choose
one of the RoadRunner methods if your ISP is Time Warner's
RoadRunner; otherwise choose Standard. Standard
Service Name If you are using PPPoE encapsulation, then type the name of your
PPPoE service here. Only valid with PPPoE encapsulation. poellc
Outgoing
My Login This field is applicable for PPPoE encapsulation only. Enter the
login name assigned by your ISP when the ZyWALL calls this
remote node. Some ISPs append this field to the Service Name
field above (e.g., jim@poellc) to access the PPPoE server.
jim
My Password Enter the password assigned by your ISP when the ZyWALL calls
this remote node. Valid for PPPoE encapsulation only.
*****
Retype to
Confirm
Type your password again to make sure that you have entered it
correctly. *****
Server IP This field is valid only when RoadRunner is selected in the Service
Type field. The ZyWALL will find the RoadRunner Server IP
automatically if this field is left blank. If it does not, then you must
enter the authentication server IP address here.
Route This field refers to the protocol that will be routed by your ZyWALL –
IP is the only option for the ZyWALL. IP
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to select
Yes and press [ENTER] to go to Menu 11.3 - Remote Node
Network Layer Options. No
(default)
Session Options
Edit Filter sets
This field leads to another “hidden” menu. Use [SPACE BAR] to
select Yes and press [ENTER] to open menu 11.5 to edit the filter
sets. See the Remote Node Filter section for more details. No
(default)
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to
save your configuration, or press [ESC] at any time to cancel.
10.3.2 PPPoE Encapsulation
The ZyWALL supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use PPPoE
encapsulation when you’re using the ZyWALL with a DSL modem as the WAN device. If you change the