ZyXEL Communications ZyXEL ZyWALL 2WE - Manual (Page 258)

ZyWALL 2 and ZyWALL 2WE
22-12 Firmware and Configuration File Maintenance
When you telnet into the ZyWALL, you will see the following screens for uploading firmware and the
configuration file using FTP.
Figure 22-13 Telnet Into Menu 24.7.1: Upload System Firmware
22.4.2 Configuration File Upload
You see the following screen when you telnet into menu 24.7.2.
Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your workstation and "ras" is the
remote file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
Press ENTER to Exit: