ZyXEL Communications ZyXEL ZyWALL 2WE - Manual (Page 49)

ZyWALL 2 and ZyWALL 2WE
Introducing the SMT 4-3
4.3.1 Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
Figure 4-3 Main Menu (ZyWALL 2WE)
4.3.2 System Management Terminal Interface Summary
Table 4-1 Main Menu Summary
NO. MENU TITLE FUNCTION
1 General Setup Use this menu to set up dynamic DNS and administrative information.
2 WAN Setup Use this menu to clone a MAC address from a computer on your LAN.
3 LAN Setup Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings and configure the wireless LAN port (not available on all models).
4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
11 Remote Node Setup Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
12 Static Routing Setup Configure IP static routes in this menu.
15 NAT Setup Use this menu to configure Network Address Translation.
21 Filter and Firewall Setup Configure filters, activate/deactivate the firewall and view the firewall log.
22 SNMP Configuration Use this menu to configure SNMP-related parameters.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ZyWALL 2WE Main Menu
Getting Started Advanced Management
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
Enter Menu Selection Number: